Package com.google.cloud.bigquery.datatransfer.v1

Class TransferConfig.Builder

java.lang.Object
com.google.protobuf.AbstractMessageLite.Builder
com.google.protobuf.AbstractMessage.Builder<BuilderT>
com.google.protobuf.GeneratedMessage.Builder<TransferConfig.Builder>
com.google.cloud.bigquery.datatransfer.v1.TransferConfig.Builder
All Implemented Interfaces:
TransferConfigOrBuilder, com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, Cloneable
Enclosing class:
TransferConfig
public static final class TransferConfig.Builder extends com.google.protobuf.GeneratedMessage.Builder<TransferConfig.Builder> implements TransferConfigOrBuilder
 Represents a data transfer configuration. A transfer configuration
 contains all metadata needed to perform a data transfer. For example,
 `destination_dataset_id` specifies where data should be stored.
 When a new transfer configuration is created, the specified
 `destination_dataset_id` is created when needed and shared with the
 appropriate data source service account.
Protobuf type google.cloud.bigquery.datatransfer.v1.TransferConfig

  • Method Details

    • getDescriptor

      public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

    • internalGetFieldAccessorTable

      protected com.google.protobuf.GeneratedMessage.FieldAccessorTable internalGetFieldAccessorTable()
      Specified by:
      internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessage.Builder<TransferConfig.Builder>

    • clear

      public TransferConfig.Builder clear()
      Specified by:
      clear in interface com.google.protobuf.Message.Builder
      Specified by:
      clear in interface com.google.protobuf.MessageLite.Builder
      Overrides:
      clear in class com.google.protobuf.GeneratedMessage.Builder<TransferConfig.Builder>

    • getDescriptorForType

      public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
      Specified by:
      getDescriptorForType in interface com.google.protobuf.Message.Builder
      Specified by:
      getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
      Overrides:
      getDescriptorForType in class com.google.protobuf.GeneratedMessage.Builder<TransferConfig.Builder>

    • getDefaultInstanceForType

      public TransferConfig getDefaultInstanceForType()
      Specified by:
      getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
      Specified by:
      getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

    • build

      public TransferConfig build()
      Specified by:
      build in interface com.google.protobuf.Message.Builder
      Specified by:
      build in interface com.google.protobuf.MessageLite.Builder

    • buildPartial

      public TransferConfig buildPartial()
      Specified by:
      buildPartial in interface com.google.protobuf.Message.Builder
      Specified by:
      buildPartial in interface com.google.protobuf.MessageLite.Builder

    • mergeFrom

      public TransferConfig.Builder mergeFrom(com.google.protobuf.Message other)
      Specified by:
      mergeFrom in interface com.google.protobuf.Message.Builder
      Overrides:
      mergeFrom in class com.google.protobuf.AbstractMessage.Builder<TransferConfig.Builder>

    • mergeFrom

      public TransferConfig.Builder mergeFrom(TransferConfig other)

    • isInitialized

      public final boolean isInitialized()
      Specified by:
      isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
      Overrides:
      isInitialized in class com.google.protobuf.GeneratedMessage.Builder<TransferConfig.Builder>

    • mergeFrom

      public TransferConfig.Builder mergeFrom(com.google.protobuf.CodedInputStream input, com.google.protobuf.ExtensionRegistryLite extensionRegistry) throws IOException
      Specified by:
      mergeFrom in interface com.google.protobuf.Message.Builder
      Specified by:
      mergeFrom in interface com.google.protobuf.MessageLite.Builder
      Overrides:
      mergeFrom in class com.google.protobuf.AbstractMessage.Builder<TransferConfig.Builder>
      Throws:
      IOException

    • getDestinationCase

      public TransferConfig.DestinationCase getDestinationCase()
      Specified by:
      getDestinationCase in interface TransferConfigOrBuilder

    • clearDestination

      public TransferConfig.Builder clearDestination()

    • getName

      public String getName()
       Identifier. The resource name of the transfer config.
 Transfer config names have the form either
 `projects/{project_id}/locations/{region}/transferConfigs/{config_id}` or
 `projects/{project_id}/transferConfigs/{config_id}`,
 where `config_id` is usually a UUID, even though it is not
 guaranteed or required. The name is ignored when creating a transfer
 config.
      string name = 1 [(.google.api.field_behavior) = IDENTIFIER];
      Specified by:
      getName in interface TransferConfigOrBuilder
      Returns:
      The name.

    • getNameBytes

      public com.google.protobuf.ByteString getNameBytes()
       Identifier. The resource name of the transfer config.
 Transfer config names have the form either
 `projects/{project_id}/locations/{region}/transferConfigs/{config_id}` or
 `projects/{project_id}/transferConfigs/{config_id}`,
 where `config_id` is usually a UUID, even though it is not
 guaranteed or required. The name is ignored when creating a transfer
 config.
      string name = 1 [(.google.api.field_behavior) = IDENTIFIER];
      Specified by:
      getNameBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for name.

    • setName

      public TransferConfig.Builder setName(String value)
       Identifier. The resource name of the transfer config.
 Transfer config names have the form either
 `projects/{project_id}/locations/{region}/transferConfigs/{config_id}` or
 `projects/{project_id}/transferConfigs/{config_id}`,
 where `config_id` is usually a UUID, even though it is not
 guaranteed or required. The name is ignored when creating a transfer
 config.
      string name = 1 [(.google.api.field_behavior) = IDENTIFIER];
      Parameters:
      value - The name to set.
      Returns:
      This builder for chaining.

    • clearName

      public TransferConfig.Builder clearName()
       Identifier. The resource name of the transfer config.
 Transfer config names have the form either
 `projects/{project_id}/locations/{region}/transferConfigs/{config_id}` or
 `projects/{project_id}/transferConfigs/{config_id}`,
 where `config_id` is usually a UUID, even though it is not
 guaranteed or required. The name is ignored when creating a transfer
 config.
      string name = 1 [(.google.api.field_behavior) = IDENTIFIER];
      Returns:
      This builder for chaining.

    • setNameBytes

      public TransferConfig.Builder setNameBytes(com.google.protobuf.ByteString value)
       Identifier. The resource name of the transfer config.
 Transfer config names have the form either
 `projects/{project_id}/locations/{region}/transferConfigs/{config_id}` or
 `projects/{project_id}/transferConfigs/{config_id}`,
 where `config_id` is usually a UUID, even though it is not
 guaranteed or required. The name is ignored when creating a transfer
 config.
      string name = 1 [(.google.api.field_behavior) = IDENTIFIER];
      Parameters:
      value - The bytes for name to set.
      Returns:
      This builder for chaining.

    • hasDestinationDatasetId

      public boolean hasDestinationDatasetId()
       The BigQuery target dataset id.
      string destination_dataset_id = 2;
      Specified by:
      hasDestinationDatasetId in interface TransferConfigOrBuilder
      Returns:
      Whether the destinationDatasetId field is set.

    • getDestinationDatasetId

      public String getDestinationDatasetId()
       The BigQuery target dataset id.
      string destination_dataset_id = 2;
      Specified by:
      getDestinationDatasetId in interface TransferConfigOrBuilder
      Returns:
      The destinationDatasetId.

    • getDestinationDatasetIdBytes

      public com.google.protobuf.ByteString getDestinationDatasetIdBytes()
       The BigQuery target dataset id.
      string destination_dataset_id = 2;
      Specified by:
      getDestinationDatasetIdBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for destinationDatasetId.

    • setDestinationDatasetId

      public TransferConfig.Builder setDestinationDatasetId(String value)
       The BigQuery target dataset id.
      string destination_dataset_id = 2;
      Parameters:
      value - The destinationDatasetId to set.
      Returns:
      This builder for chaining.

    • clearDestinationDatasetId

      public TransferConfig.Builder clearDestinationDatasetId()
       The BigQuery target dataset id.
      string destination_dataset_id = 2;
      Returns:
      This builder for chaining.

    • setDestinationDatasetIdBytes

      public TransferConfig.Builder setDestinationDatasetIdBytes(com.google.protobuf.ByteString value)
       The BigQuery target dataset id.
      string destination_dataset_id = 2;
      Parameters:
      value - The bytes for destinationDatasetId to set.
      Returns:
      This builder for chaining.

    • getDisplayName

      public String getDisplayName()
       User specified display name for the data transfer.
      string display_name = 3;
      Specified by:
      getDisplayName in interface TransferConfigOrBuilder
      Returns:
      The displayName.

    • getDisplayNameBytes

      public com.google.protobuf.ByteString getDisplayNameBytes()
       User specified display name for the data transfer.
      string display_name = 3;
      Specified by:
      getDisplayNameBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for displayName.

    • setDisplayName

      public TransferConfig.Builder setDisplayName(String value)
       User specified display name for the data transfer.
      string display_name = 3;
      Parameters:
      value - The displayName to set.
      Returns:
      This builder for chaining.

    • clearDisplayName

      public TransferConfig.Builder clearDisplayName()
       User specified display name for the data transfer.
      string display_name = 3;
      Returns:
      This builder for chaining.

    • setDisplayNameBytes

      public TransferConfig.Builder setDisplayNameBytes(com.google.protobuf.ByteString value)
       User specified display name for the data transfer.
      string display_name = 3;
      Parameters:
      value - The bytes for displayName to set.
      Returns:
      This builder for chaining.

    • getDataSourceId

      public String getDataSourceId()
       Data source ID. This cannot be changed once data transfer is created. The
 full list of available data source IDs can be returned through an API call:
 https://cloud.google.com/bigquery-transfer/docs/reference/datatransfer/rest/v1/projects.locations.dataSources/list
      string data_source_id = 5;
      Specified by:
      getDataSourceId in interface TransferConfigOrBuilder
      Returns:
      The dataSourceId.

    • getDataSourceIdBytes

      public com.google.protobuf.ByteString getDataSourceIdBytes()
       Data source ID. This cannot be changed once data transfer is created. The
 full list of available data source IDs can be returned through an API call:
 https://cloud.google.com/bigquery-transfer/docs/reference/datatransfer/rest/v1/projects.locations.dataSources/list
      string data_source_id = 5;
      Specified by:
      getDataSourceIdBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for dataSourceId.

    • setDataSourceId

      public TransferConfig.Builder setDataSourceId(String value)
       Data source ID. This cannot be changed once data transfer is created. The
 full list of available data source IDs can be returned through an API call:
 https://cloud.google.com/bigquery-transfer/docs/reference/datatransfer/rest/v1/projects.locations.dataSources/list
      string data_source_id = 5;
      Parameters:
      value - The dataSourceId to set.
      Returns:
      This builder for chaining.

    • clearDataSourceId

      public TransferConfig.Builder clearDataSourceId()
       Data source ID. This cannot be changed once data transfer is created. The
 full list of available data source IDs can be returned through an API call:
 https://cloud.google.com/bigquery-transfer/docs/reference/datatransfer/rest/v1/projects.locations.dataSources/list
      string data_source_id = 5;
      Returns:
      This builder for chaining.

    • setDataSourceIdBytes

      public TransferConfig.Builder setDataSourceIdBytes(com.google.protobuf.ByteString value)
       Data source ID. This cannot be changed once data transfer is created. The
 full list of available data source IDs can be returned through an API call:
 https://cloud.google.com/bigquery-transfer/docs/reference/datatransfer/rest/v1/projects.locations.dataSources/list
      string data_source_id = 5;
      Parameters:
      value - The bytes for dataSourceId to set.
      Returns:
      This builder for chaining.

    • hasParams

      public boolean hasParams()
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;
      Specified by:
      hasParams in interface TransferConfigOrBuilder
      Returns:
      Whether the params field is set.

    • getParams

      public com.google.protobuf.Struct getParams()
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;
      Specified by:
      getParams in interface TransferConfigOrBuilder
      Returns:
      The params.

    • setParams

      public TransferConfig.Builder setParams(com.google.protobuf.Struct value)
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;

    • setParams

      public TransferConfig.Builder setParams(com.google.protobuf.Struct.Builder builderForValue)
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;

    • mergeParams

      public TransferConfig.Builder mergeParams(com.google.protobuf.Struct value)
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;

    • clearParams

      public TransferConfig.Builder clearParams()
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;

    • getParamsBuilder

      public com.google.protobuf.Struct.Builder getParamsBuilder()
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;

    • getParamsOrBuilder

      public com.google.protobuf.StructOrBuilder getParamsOrBuilder()
       Parameters specific to each data source. For more information see the
 bq tab in the 'Setting up a data transfer' section for each data source.
 For example the parameters for Cloud Storage transfers are listed here:
 https://cloud.google.com/bigquery-transfer/docs/cloud-storage-transfer#bq
      .google.protobuf.Struct params = 9;
      Specified by:
      getParamsOrBuilder in interface TransferConfigOrBuilder

    • getSchedule

      public String getSchedule()
       Data transfer schedule.
 If the data source does not support a custom schedule, this should be
 empty. If it is empty, the default value for the data source will be used.
 The specified times are in UTC.
 Examples of valid format:
 `1st,3rd monday of month 15:30`,
 `every wed,fri of jan,jun 13:15`, and
 `first sunday of quarter 00:00`.
 See more explanation about the format here:
 https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format

 NOTE: The minimum interval time between recurring transfers depends on the
 data source; refer to the documentation for your data source.
      string schedule = 7;
      Specified by:
      getSchedule in interface TransferConfigOrBuilder
      Returns:
      The schedule.

    • getScheduleBytes

      public com.google.protobuf.ByteString getScheduleBytes()
       Data transfer schedule.
 If the data source does not support a custom schedule, this should be
 empty. If it is empty, the default value for the data source will be used.
 The specified times are in UTC.
 Examples of valid format:
 `1st,3rd monday of month 15:30`,
 `every wed,fri of jan,jun 13:15`, and
 `first sunday of quarter 00:00`.
 See more explanation about the format here:
 https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format

 NOTE: The minimum interval time between recurring transfers depends on the
 data source; refer to the documentation for your data source.
      string schedule = 7;
      Specified by:
      getScheduleBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for schedule.

    • setSchedule

      public TransferConfig.Builder setSchedule(String value)
       Data transfer schedule.
 If the data source does not support a custom schedule, this should be
 empty. If it is empty, the default value for the data source will be used.
 The specified times are in UTC.
 Examples of valid format:
 `1st,3rd monday of month 15:30`,
 `every wed,fri of jan,jun 13:15`, and
 `first sunday of quarter 00:00`.
 See more explanation about the format here:
 https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format

 NOTE: The minimum interval time between recurring transfers depends on the
 data source; refer to the documentation for your data source.
      string schedule = 7;
      Parameters:
      value - The schedule to set.
      Returns:
      This builder for chaining.

    • clearSchedule

      public TransferConfig.Builder clearSchedule()
       Data transfer schedule.
 If the data source does not support a custom schedule, this should be
 empty. If it is empty, the default value for the data source will be used.
 The specified times are in UTC.
 Examples of valid format:
 `1st,3rd monday of month 15:30`,
 `every wed,fri of jan,jun 13:15`, and
 `first sunday of quarter 00:00`.
 See more explanation about the format here:
 https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format

 NOTE: The minimum interval time between recurring transfers depends on the
 data source; refer to the documentation for your data source.
      string schedule = 7;
      Returns:
      This builder for chaining.

    • setScheduleBytes

      public TransferConfig.Builder setScheduleBytes(com.google.protobuf.ByteString value)
       Data transfer schedule.
 If the data source does not support a custom schedule, this should be
 empty. If it is empty, the default value for the data source will be used.
 The specified times are in UTC.
 Examples of valid format:
 `1st,3rd monday of month 15:30`,
 `every wed,fri of jan,jun 13:15`, and
 `first sunday of quarter 00:00`.
 See more explanation about the format here:
 https://cloud.google.com/appengine/docs/flexible/python/scheduling-jobs-with-cron-yaml#the_schedule_format

 NOTE: The minimum interval time between recurring transfers depends on the
 data source; refer to the documentation for your data source.
      string schedule = 7;
      Parameters:
      value - The bytes for schedule to set.
      Returns:
      This builder for chaining.

    • hasScheduleOptions

      public boolean hasScheduleOptions()
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;
      Specified by:
      hasScheduleOptions in interface TransferConfigOrBuilder
      Returns:
      Whether the scheduleOptions field is set.

    • getScheduleOptions

      public ScheduleOptions getScheduleOptions()
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;
      Specified by:
      getScheduleOptions in interface TransferConfigOrBuilder
      Returns:
      The scheduleOptions.

    • setScheduleOptions

      public TransferConfig.Builder setScheduleOptions(ScheduleOptions value)
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;

    • setScheduleOptions

      public TransferConfig.Builder setScheduleOptions(ScheduleOptions.Builder builderForValue)
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;

    • mergeScheduleOptions

      public TransferConfig.Builder mergeScheduleOptions(ScheduleOptions value)
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;

    • clearScheduleOptions

      public TransferConfig.Builder clearScheduleOptions()
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;

    • getScheduleOptionsBuilder

      public ScheduleOptions.Builder getScheduleOptionsBuilder()
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;

    • getScheduleOptionsOrBuilder

      public ScheduleOptionsOrBuilder getScheduleOptionsOrBuilder()
       Options customizing the data transfer schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptions schedule_options = 24;
      Specified by:
      getScheduleOptionsOrBuilder in interface TransferConfigOrBuilder

    • hasScheduleOptionsV2

      public boolean hasScheduleOptionsV2()
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;
      Specified by:
      hasScheduleOptionsV2 in interface TransferConfigOrBuilder
      Returns:
      Whether the scheduleOptionsV2 field is set.

    • getScheduleOptionsV2

      public ScheduleOptionsV2 getScheduleOptionsV2()
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;
      Specified by:
      getScheduleOptionsV2 in interface TransferConfigOrBuilder
      Returns:
      The scheduleOptionsV2.

    • setScheduleOptionsV2

      public TransferConfig.Builder setScheduleOptionsV2(ScheduleOptionsV2 value)
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;

    • setScheduleOptionsV2

      public TransferConfig.Builder setScheduleOptionsV2(ScheduleOptionsV2.Builder builderForValue)
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;

    • mergeScheduleOptionsV2

      public TransferConfig.Builder mergeScheduleOptionsV2(ScheduleOptionsV2 value)
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;

    • clearScheduleOptionsV2

      public TransferConfig.Builder clearScheduleOptionsV2()
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;

    • getScheduleOptionsV2Builder

      public ScheduleOptionsV2.Builder getScheduleOptionsV2Builder()
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;

    • getScheduleOptionsV2OrBuilder

      public ScheduleOptionsV2OrBuilder getScheduleOptionsV2OrBuilder()
       Options customizing different types of data transfer schedule.
 This field replaces "schedule" and "schedule_options" fields.
 ScheduleOptionsV2 cannot be used together with ScheduleOptions/Schedule.
      .google.cloud.bigquery.datatransfer.v1.ScheduleOptionsV2 schedule_options_v2 = 31;
      Specified by:
      getScheduleOptionsV2OrBuilder in interface TransferConfigOrBuilder

    • getDataRefreshWindowDays

      public int getDataRefreshWindowDays()
       The number of days to look back to automatically refresh the data.
 For example, if `data_refresh_window_days = 10`, then every day
 BigQuery reingests data for [today-10, today-1], rather than ingesting data
 for just [today-1].
 Only valid if the data source supports the feature. Set the value to 0
 to use the default value.
      int32 data_refresh_window_days = 12;
      Specified by:
      getDataRefreshWindowDays in interface TransferConfigOrBuilder
      Returns:
      The dataRefreshWindowDays.

    • setDataRefreshWindowDays

      public TransferConfig.Builder setDataRefreshWindowDays(int value)
       The number of days to look back to automatically refresh the data.
 For example, if `data_refresh_window_days = 10`, then every day
 BigQuery reingests data for [today-10, today-1], rather than ingesting data
 for just [today-1].
 Only valid if the data source supports the feature. Set the value to 0
 to use the default value.
      int32 data_refresh_window_days = 12;
      Parameters:
      value - The dataRefreshWindowDays to set.
      Returns:
      This builder for chaining.

    • clearDataRefreshWindowDays

      public TransferConfig.Builder clearDataRefreshWindowDays()
       The number of days to look back to automatically refresh the data.
 For example, if `data_refresh_window_days = 10`, then every day
 BigQuery reingests data for [today-10, today-1], rather than ingesting data
 for just [today-1].
 Only valid if the data source supports the feature. Set the value to 0
 to use the default value.
      int32 data_refresh_window_days = 12;
      Returns:
      This builder for chaining.

    • getDisabled

      public boolean getDisabled()
       Is this config disabled. When set to true, no runs will be scheduled for
 this transfer config.
      bool disabled = 13;
      Specified by:
      getDisabled in interface TransferConfigOrBuilder
      Returns:
      The disabled.

    • setDisabled

      public TransferConfig.Builder setDisabled(boolean value)
       Is this config disabled. When set to true, no runs will be scheduled for
 this transfer config.
      bool disabled = 13;
      Parameters:
      value - The disabled to set.
      Returns:
      This builder for chaining.

    • clearDisabled

      public TransferConfig.Builder clearDisabled()
       Is this config disabled. When set to true, no runs will be scheduled for
 this transfer config.
      bool disabled = 13;
      Returns:
      This builder for chaining.

    • hasUpdateTime

      public boolean hasUpdateTime()
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      hasUpdateTime in interface TransferConfigOrBuilder
      Returns:
      Whether the updateTime field is set.

    • getUpdateTime

      public com.google.protobuf.Timestamp getUpdateTime()
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getUpdateTime in interface TransferConfigOrBuilder
      Returns:
      The updateTime.

    • setUpdateTime

      public TransferConfig.Builder setUpdateTime(com.google.protobuf.Timestamp value)
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • setUpdateTime

      public TransferConfig.Builder setUpdateTime(com.google.protobuf.Timestamp.Builder builderForValue)
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • mergeUpdateTime

      public TransferConfig.Builder mergeUpdateTime(com.google.protobuf.Timestamp value)
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • clearUpdateTime

      public TransferConfig.Builder clearUpdateTime()
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getUpdateTimeBuilder

      public com.google.protobuf.Timestamp.Builder getUpdateTimeBuilder()
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getUpdateTimeOrBuilder

      public com.google.protobuf.TimestampOrBuilder getUpdateTimeOrBuilder()
       Output only. Data transfer modification time. Ignored by server on input.
      .google.protobuf.Timestamp update_time = 4 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getUpdateTimeOrBuilder in interface TransferConfigOrBuilder

    • hasNextRunTime

      public boolean hasNextRunTime()
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      hasNextRunTime in interface TransferConfigOrBuilder
      Returns:
      Whether the nextRunTime field is set.

    • getNextRunTime

      public com.google.protobuf.Timestamp getNextRunTime()
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getNextRunTime in interface TransferConfigOrBuilder
      Returns:
      The nextRunTime.

    • setNextRunTime

      public TransferConfig.Builder setNextRunTime(com.google.protobuf.Timestamp value)
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • setNextRunTime

      public TransferConfig.Builder setNextRunTime(com.google.protobuf.Timestamp.Builder builderForValue)
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • mergeNextRunTime

      public TransferConfig.Builder mergeNextRunTime(com.google.protobuf.Timestamp value)
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • clearNextRunTime

      public TransferConfig.Builder clearNextRunTime()
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getNextRunTimeBuilder

      public com.google.protobuf.Timestamp.Builder getNextRunTimeBuilder()
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getNextRunTimeOrBuilder

      public com.google.protobuf.TimestampOrBuilder getNextRunTimeOrBuilder()
       Output only. Next time when data transfer will run.
      .google.protobuf.Timestamp next_run_time = 8 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getNextRunTimeOrBuilder in interface TransferConfigOrBuilder

    • getStateValue

      public int getStateValue()
       Output only. State of the most recently updated transfer run.
      .google.cloud.bigquery.datatransfer.v1.TransferState state = 10 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getStateValue in interface TransferConfigOrBuilder
      Returns:
      The enum numeric value on the wire for state.

    • setStateValue

      public TransferConfig.Builder setStateValue(int value)
       Output only. State of the most recently updated transfer run.
      .google.cloud.bigquery.datatransfer.v1.TransferState state = 10 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Parameters:
      value - The enum numeric value on the wire for state to set.
      Returns:
      This builder for chaining.

    • getState

      public TransferState getState()
       Output only. State of the most recently updated transfer run.
      .google.cloud.bigquery.datatransfer.v1.TransferState state = 10 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getState in interface TransferConfigOrBuilder
      Returns:
      The state.

    • setState

      public TransferConfig.Builder setState(TransferState value)
       Output only. State of the most recently updated transfer run.
      .google.cloud.bigquery.datatransfer.v1.TransferState state = 10 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Parameters:
      value - The state to set.
      Returns:
      This builder for chaining.

    • clearState

      public TransferConfig.Builder clearState()
       Output only. State of the most recently updated transfer run.
      .google.cloud.bigquery.datatransfer.v1.TransferState state = 10 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Returns:
      This builder for chaining.

    • getUserId

      public long getUserId()
       Deprecated. Unique ID of the user on whose behalf transfer is done.
      int64 user_id = 11;
      Specified by:
      getUserId in interface TransferConfigOrBuilder
      Returns:
      The userId.

    • setUserId

      public TransferConfig.Builder setUserId(long value)
       Deprecated. Unique ID of the user on whose behalf transfer is done.
      int64 user_id = 11;
      Parameters:
      value - The userId to set.
      Returns:
      This builder for chaining.

    • clearUserId

      public TransferConfig.Builder clearUserId()
       Deprecated. Unique ID of the user on whose behalf transfer is done.
      int64 user_id = 11;
      Returns:
      This builder for chaining.

    • getDatasetRegion

      public String getDatasetRegion()
       Output only. Region in which BigQuery dataset is located.
      string dataset_region = 14 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getDatasetRegion in interface TransferConfigOrBuilder
      Returns:
      The datasetRegion.

    • getDatasetRegionBytes

      public com.google.protobuf.ByteString getDatasetRegionBytes()
       Output only. Region in which BigQuery dataset is located.
      string dataset_region = 14 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getDatasetRegionBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for datasetRegion.

    • setDatasetRegion

      public TransferConfig.Builder setDatasetRegion(String value)
       Output only. Region in which BigQuery dataset is located.
      string dataset_region = 14 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Parameters:
      value - The datasetRegion to set.
      Returns:
      This builder for chaining.

    • clearDatasetRegion

      public TransferConfig.Builder clearDatasetRegion()
       Output only. Region in which BigQuery dataset is located.
      string dataset_region = 14 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Returns:
      This builder for chaining.

    • setDatasetRegionBytes

      public TransferConfig.Builder setDatasetRegionBytes(com.google.protobuf.ByteString value)
       Output only. Region in which BigQuery dataset is located.
      string dataset_region = 14 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Parameters:
      value - The bytes for datasetRegion to set.
      Returns:
      This builder for chaining.

    • getNotificationPubsubTopic

      public String getNotificationPubsubTopic()
       Pub/Sub topic where notifications will be sent after transfer runs
 associated with this transfer config finish.

 The format for specifying a pubsub topic is:
 `projects/{project_id}/topics/{topic_id}`
      string notification_pubsub_topic = 15;
      Specified by:
      getNotificationPubsubTopic in interface TransferConfigOrBuilder
      Returns:
      The notificationPubsubTopic.

    • getNotificationPubsubTopicBytes

      public com.google.protobuf.ByteString getNotificationPubsubTopicBytes()
       Pub/Sub topic where notifications will be sent after transfer runs
 associated with this transfer config finish.

 The format for specifying a pubsub topic is:
 `projects/{project_id}/topics/{topic_id}`
      string notification_pubsub_topic = 15;
      Specified by:
      getNotificationPubsubTopicBytes in interface TransferConfigOrBuilder
      Returns:
      The bytes for notificationPubsubTopic.

    • setNotificationPubsubTopic

      public TransferConfig.Builder setNotificationPubsubTopic(String value)
       Pub/Sub topic where notifications will be sent after transfer runs
 associated with this transfer config finish.

 The format for specifying a pubsub topic is:
 `projects/{project_id}/topics/{topic_id}`
      string notification_pubsub_topic = 15;
      Parameters:
      value - The notificationPubsubTopic to set.
      Returns:
      This builder for chaining.

    • clearNotificationPubsubTopic

      public TransferConfig.Builder clearNotificationPubsubTopic()
       Pub/Sub topic where notifications will be sent after transfer runs
 associated with this transfer config finish.

 The format for specifying a pubsub topic is:
 `projects/{project_id}/topics/{topic_id}`
      string notification_pubsub_topic = 15;
      Returns:
      This builder for chaining.

    • setNotificationPubsubTopicBytes

      public TransferConfig.Builder setNotificationPubsubTopicBytes(com.google.protobuf.ByteString value)
       Pub/Sub topic where notifications will be sent after transfer runs
 associated with this transfer config finish.

 The format for specifying a pubsub topic is:
 `projects/{project_id}/topics/{topic_id}`
      string notification_pubsub_topic = 15;
      Parameters:
      value - The bytes for notificationPubsubTopic to set.
      Returns:
      This builder for chaining.

    • hasEmailPreferences

      public boolean hasEmailPreferences()
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;
      Specified by:
      hasEmailPreferences in interface TransferConfigOrBuilder
      Returns:
      Whether the emailPreferences field is set.

    • getEmailPreferences

      public EmailPreferences getEmailPreferences()
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;
      Specified by:
      getEmailPreferences in interface TransferConfigOrBuilder
      Returns:
      The emailPreferences.

    • setEmailPreferences

      public TransferConfig.Builder setEmailPreferences(EmailPreferences value)
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;

    • setEmailPreferences

      public TransferConfig.Builder setEmailPreferences(EmailPreferences.Builder builderForValue)
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;

    • mergeEmailPreferences

      public TransferConfig.Builder mergeEmailPreferences(EmailPreferences value)
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;

    • clearEmailPreferences

      public TransferConfig.Builder clearEmailPreferences()
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;

    • getEmailPreferencesBuilder

      public EmailPreferences.Builder getEmailPreferencesBuilder()
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;

    • getEmailPreferencesOrBuilder

      public EmailPreferencesOrBuilder getEmailPreferencesOrBuilder()
       Email notifications will be sent according to these preferences
 to the email address of the user who owns this transfer config.
      .google.cloud.bigquery.datatransfer.v1.EmailPreferences email_preferences = 18;
      Specified by:
      getEmailPreferencesOrBuilder in interface TransferConfigOrBuilder

    • hasOwnerInfo

      public boolean hasOwnerInfo()
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      hasOwnerInfo in interface TransferConfigOrBuilder
      Returns:
      Whether the ownerInfo field is set.

    • getOwnerInfo

      public UserInfo getOwnerInfo()
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getOwnerInfo in interface TransferConfigOrBuilder
      Returns:
      The ownerInfo.

    • setOwnerInfo

      public TransferConfig.Builder setOwnerInfo(UserInfo value)
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • setOwnerInfo

      public TransferConfig.Builder setOwnerInfo(UserInfo.Builder builderForValue)
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • mergeOwnerInfo

      public TransferConfig.Builder mergeOwnerInfo(UserInfo value)
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • clearOwnerInfo

      public TransferConfig.Builder clearOwnerInfo()
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getOwnerInfoBuilder

      public UserInfo.Builder getOwnerInfoBuilder()
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getOwnerInfoOrBuilder

      public UserInfoOrBuilder getOwnerInfoOrBuilder()
       Output only. Information about the user whose credentials are used to
 transfer data. Populated only for `transferConfigs.get` requests. In case
 the user information is not available, this field will not be populated.
      optional .google.cloud.bigquery.datatransfer.v1.UserInfo owner_info = 27 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getOwnerInfoOrBuilder in interface TransferConfigOrBuilder

    • hasEncryptionConfiguration

      public boolean hasEncryptionConfiguration()
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;
      Specified by:
      hasEncryptionConfiguration in interface TransferConfigOrBuilder
      Returns:
      Whether the encryptionConfiguration field is set.

    • getEncryptionConfiguration

      public EncryptionConfiguration getEncryptionConfiguration()
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;
      Specified by:
      getEncryptionConfiguration in interface TransferConfigOrBuilder
      Returns:
      The encryptionConfiguration.

    • setEncryptionConfiguration

      public TransferConfig.Builder setEncryptionConfiguration(EncryptionConfiguration value)
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;

    • setEncryptionConfiguration

      public TransferConfig.Builder setEncryptionConfiguration(EncryptionConfiguration.Builder builderForValue)
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;

    • mergeEncryptionConfiguration

      public TransferConfig.Builder mergeEncryptionConfiguration(EncryptionConfiguration value)
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;

    • clearEncryptionConfiguration

      public TransferConfig.Builder clearEncryptionConfiguration()
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;

    • getEncryptionConfigurationBuilder

      public EncryptionConfiguration.Builder getEncryptionConfigurationBuilder()
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;

    • getEncryptionConfigurationOrBuilder

      public EncryptionConfigurationOrBuilder getEncryptionConfigurationOrBuilder()
       The encryption configuration part. Currently, it is only used for the
 optional KMS key name. The BigQuery service account of your project must be
 granted permissions to use the key. Read methods will return the key name
 applied in effect. Write methods will apply the key if it is present, or
 otherwise try to apply project default keys if it is absent.
      .google.cloud.bigquery.datatransfer.v1.EncryptionConfiguration encryption_configuration = 28;
      Specified by:
      getEncryptionConfigurationOrBuilder in interface TransferConfigOrBuilder

    • hasError

      public boolean hasError()
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      hasError in interface TransferConfigOrBuilder
      Returns:
      Whether the error field is set.

    • getError

      public Status getError()
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getError in interface TransferConfigOrBuilder
      Returns:
      The error.

    • setError

      public TransferConfig.Builder setError(Status value)
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • setError

      public TransferConfig.Builder setError(Status.Builder builderForValue)
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • mergeError

      public TransferConfig.Builder mergeError(Status value)
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • clearError

      public TransferConfig.Builder clearError()
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getErrorBuilder

      public Status.Builder getErrorBuilder()
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];

    • getErrorOrBuilder

      public StatusOrBuilder getErrorOrBuilder()
       Output only. Error code with detailed information about reason of the
 latest config failure.
      .google.rpc.Status error = 32 [(.google.api.field_behavior) = OUTPUT_ONLY];
      Specified by:
      getErrorOrBuilder in interface TransferConfigOrBuilder