Package software.amazon.awssdk.services.outposts.model

Class UpdateSiteRackPhysicalPropertiesRequest

    • Method Detail

      • siteId

        public final String siteId()

        The ID or the Amazon Resource Name (ARN) of the site.

        Returns:
        The ID or the Amazon Resource Name (ARN) of the site.

      • powerDrawKva

        public final PowerDrawKva powerDrawKva()

        The power draw, in kVA, available at the hardware placement position for the rack.

        If the service returns an enum value that is not available in the current SDK version, powerDrawKva will return PowerDrawKva.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerDrawKvaAsString().

        Returns:
        The power draw, in kVA, available at the hardware placement position for the rack.
        See Also:
        PowerDrawKva

      • powerDrawKvaAsString

        public final String powerDrawKvaAsString()

        The power draw, in kVA, available at the hardware placement position for the rack.

        If the service returns an enum value that is not available in the current SDK version, powerDrawKva will return PowerDrawKva.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerDrawKvaAsString().

        Returns:
        The power draw, in kVA, available at the hardware placement position for the rack.
        See Also:
        PowerDrawKva

      • powerPhase

        public final PowerPhase powerPhase()

        The power option that you can provide for hardware.

        • Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

        • Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

        If the service returns an enum value that is not available in the current SDK version, powerPhase will return PowerPhase.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerPhaseAsString().

        Returns:
        The power option that you can provide for hardware.

        • Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

        • Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

        See Also:
        PowerPhase

      • powerPhaseAsString

        public final String powerPhaseAsString()

        The power option that you can provide for hardware.

        • Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

        • Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

        If the service returns an enum value that is not available in the current SDK version, powerPhase will return PowerPhase.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerPhaseAsString().

        Returns:
        The power option that you can provide for hardware.

        • Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

        • Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

        See Also:
        PowerPhase

      • powerConnector

        public final PowerConnector powerConnector()

        The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

        • Single-phase AC feed

          • L6-30P – (common in US); 30A; single phase

          • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

        • Three-phase AC feed

          • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

          • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

        If the service returns an enum value that is not available in the current SDK version, powerConnector will return PowerConnector.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerConnectorAsString().

        Returns:
        The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

        • Single-phase AC feed

          • L6-30P – (common in US); 30A; single phase

          • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

        • Three-phase AC feed

          • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

          • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

        See Also:
        PowerConnector

      • powerConnectorAsString

        public final String powerConnectorAsString()

        The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

        • Single-phase AC feed

          • L6-30P – (common in US); 30A; single phase

          • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

        • Three-phase AC feed

          • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

          • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

        If the service returns an enum value that is not available in the current SDK version, powerConnector will return PowerConnector.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerConnectorAsString().

        Returns:
        The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

        • Single-phase AC feed

          • L6-30P – (common in US); 30A; single phase

          • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

        • Three-phase AC feed

          • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

          • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

        See Also:
        PowerConnector

      • powerFeedDrop

        public final PowerFeedDrop powerFeedDrop()

        Indicates whether the power feed comes above or below the rack.

        If the service returns an enum value that is not available in the current SDK version, powerFeedDrop will return PowerFeedDrop.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerFeedDropAsString().

        Returns:
        Indicates whether the power feed comes above or below the rack.
        See Also:
        PowerFeedDrop

      • powerFeedDropAsString

        public final String powerFeedDropAsString()

        Indicates whether the power feed comes above or below the rack.

        If the service returns an enum value that is not available in the current SDK version, powerFeedDrop will return PowerFeedDrop.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from powerFeedDropAsString().

        Returns:
        Indicates whether the power feed comes above or below the rack.
        See Also:
        PowerFeedDrop

      • uplinkGbps

        public final UplinkGbps uplinkGbps()

        The uplink speed the rack should support for the connection to the Region.

        If the service returns an enum value that is not available in the current SDK version, uplinkGbps will return UplinkGbps.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from uplinkGbpsAsString().

        Returns:
        The uplink speed the rack should support for the connection to the Region.
        See Also:
        UplinkGbps

      • uplinkGbpsAsString

        public final String uplinkGbpsAsString()

        The uplink speed the rack should support for the connection to the Region.

        If the service returns an enum value that is not available in the current SDK version, uplinkGbps will return UplinkGbps.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from uplinkGbpsAsString().

        Returns:
        The uplink speed the rack should support for the connection to the Region.
        See Also:
        UplinkGbps

      • uplinkCount

        public final UplinkCount uplinkCount()

        Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

        • 1Gbps - Uplinks available: 1, 2, 4, 6, 8

        • 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

        • 40 and 100 Gbps- Uplinks available: 1, 2, 4

        If the service returns an enum value that is not available in the current SDK version, uplinkCount will return UplinkCount.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from uplinkCountAsString().

        Returns:
        Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

        • 1Gbps - Uplinks available: 1, 2, 4, 6, 8

        • 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

        • 40 and 100 Gbps- Uplinks available: 1, 2, 4

        See Also:
        UplinkCount

      • uplinkCountAsString

        public final String uplinkCountAsString()

        Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

        • 1Gbps - Uplinks available: 1, 2, 4, 6, 8

        • 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

        • 40 and 100 Gbps- Uplinks available: 1, 2, 4

        If the service returns an enum value that is not available in the current SDK version, uplinkCount will return UplinkCount.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from uplinkCountAsString().

        Returns:
        Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

        • 1Gbps - Uplinks available: 1, 2, 4, 6, 8

        • 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

        • 40 and 100 Gbps- Uplinks available: 1, 2, 4

        See Also:
        UplinkCount

      • fiberOpticCableTypeAsString

        public final String fiberOpticCableTypeAsString()

        The type of fiber that you will use to attach the Outpost to your network.

        If the service returns an enum value that is not available in the current SDK version, fiberOpticCableType will return FiberOpticCableType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from fiberOpticCableTypeAsString().

        Returns:
        The type of fiber that you will use to attach the Outpost to your network.
        See Also:
        FiberOpticCableType

      • opticalStandard

        public final OpticalStandard opticalStandard()

        The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

        • OPTIC_10GBASE_SR: 10GBASE-SR

        • OPTIC_10GBASE_IR: 10GBASE-IR

        • OPTIC_10GBASE_LR: 10GBASE-LR

        • OPTIC_40GBASE_SR: 40GBASE-SR

        • OPTIC_40GBASE_ESR: 40GBASE-ESR

        • OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

        • OPTIC_40GBASE_LR4: 40GBASE-LR4

        • OPTIC_100GBASE_SR4: 100GBASE-SR4

        • OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

        • OPTIC_100GBASE_LR4: 100GBASE-LR4

        • OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

        • OPTIC_1000BASE_LX: 1000Base-LX

        • OPTIC_1000BASE_SX : 1000Base-SX

        If the service returns an enum value that is not available in the current SDK version, opticalStandard will return OpticalStandard.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from opticalStandardAsString().

        Returns:
        The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

        • OPTIC_10GBASE_SR: 10GBASE-SR

        • OPTIC_10GBASE_IR: 10GBASE-IR

        • OPTIC_10GBASE_LR: 10GBASE-LR

        • OPTIC_40GBASE_SR: 40GBASE-SR

        • OPTIC_40GBASE_ESR: 40GBASE-ESR

        • OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

        • OPTIC_40GBASE_LR4: 40GBASE-LR4

        • OPTIC_100GBASE_SR4: 100GBASE-SR4

        • OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

        • OPTIC_100GBASE_LR4: 100GBASE-LR4

        • OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

        • OPTIC_1000BASE_LX: 1000Base-LX

        • OPTIC_1000BASE_SX : 1000Base-SX

        See Also:
        OpticalStandard

      • opticalStandardAsString

        public final String opticalStandardAsString()

        The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

        • OPTIC_10GBASE_SR: 10GBASE-SR

        • OPTIC_10GBASE_IR: 10GBASE-IR

        • OPTIC_10GBASE_LR: 10GBASE-LR

        • OPTIC_40GBASE_SR: 40GBASE-SR

        • OPTIC_40GBASE_ESR: 40GBASE-ESR

        • OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

        • OPTIC_40GBASE_LR4: 40GBASE-LR4

        • OPTIC_100GBASE_SR4: 100GBASE-SR4

        • OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

        • OPTIC_100GBASE_LR4: 100GBASE-LR4

        • OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

        • OPTIC_1000BASE_LX: 1000Base-LX

        • OPTIC_1000BASE_SX : 1000Base-SX

        If the service returns an enum value that is not available in the current SDK version, opticalStandard will return OpticalStandard.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from opticalStandardAsString().

        Returns:
        The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

        • OPTIC_10GBASE_SR: 10GBASE-SR

        • OPTIC_10GBASE_IR: 10GBASE-IR

        • OPTIC_10GBASE_LR: 10GBASE-LR

        • OPTIC_40GBASE_SR: 40GBASE-SR

        • OPTIC_40GBASE_ESR: 40GBASE-ESR

        • OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

        • OPTIC_40GBASE_LR4: 40GBASE-LR4

        • OPTIC_100GBASE_SR4: 100GBASE-SR4

        • OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

        • OPTIC_100GBASE_LR4: 100GBASE-LR4

        • OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

        • OPTIC_1000BASE_LX: 1000Base-LX

        • OPTIC_1000BASE_SX : 1000Base-SX

        See Also:
        OpticalStandard

      • toString

        public final String toString()
        Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
        Overrides:
        toString in class Object