IClasspathEntry

All Known Implementing Classes:

ClasspathEntry
```
public interface IClasspathEntry
```
An entry on a Java project classpath identifying one or more package fragment roots. A classpath entry has a content kind (either source, IPackageFragmentRoot.K_SOURCE, or binary, IPackageFragmentRoot.K_BINARY), which is inherited by each package fragment root and package fragment associated with the entry.
A classpath entry can refer to any of the following:
- Source code in the current project. In this case, the entry identifies a root folder in the current project containing package fragments and source files with one of the Java-like extensions. The root folder itself represents a default package, subfolders represent package fragments, and files with a Java-like extension (e.g. .java files) represent compilation units. All compilation units will be compiled when the project is built. The classpath entry must specify the absolute path to the root folder. Entries of this kind are associated with the CPE_SOURCE constant. Source classpath entries can carry inclusion and exclusion patterns for selecting which source files appear as compilation units and get compiled when the project is built.
- A binary library in the current project, in another project, or in the external file system. In this case the entry identifies a JAR (or root folder) containing package fragments and .class files. The classpath entry must specify the absolute path to the JAR (or root folder), and in case it refers to an external JAR, then there is no associated resource in the workbench. Entries of this kind are associated with the CPE_LIBRARY constant.
- A required project. In this case the entry identifies another project in the workspace. The required project is used as a binary library when compiling (that is, the builder looks in the output location of the required project for required .class files when building). When performing other "development" operations - such as code assist, code resolve, type hierarchy creation, etc. - the source code of the project is referred to. Thus, development is performed against a required project's source code, and compilation is performed against a required project's last built state. The classpath entry must specify the absolute path to the project. Entries of this kind are associated with the CPE_PROJECT constant. Note: referencing a required project with a classpath entry refers to the source code or associated .class files located in its output location. It will also automatically include any other libraries or projects that the required project's classpath refers to, iff the corresponding classpath entries are tagged as being exported (isExported()). Unless exporting some classpath entries, classpaths are not chained by default - each project must specify its own classpath in its entirety.
- A path beginning in a classpath variable defined globally to the workspace. Entries of this kind are associated with the CPE_VARIABLE constant. Classpath variables are created using JavaCore#setClasspathVariable(String, IPath, org.eclipse.core.runtime.IProgressMonitor), and gets resolved, to either a project or library entry, using JavaCore.getResolvedClasspathEntry(IClasspathEntry). It is also possible to register an automatic initializer (ClasspathVariableInitializer), which will be invoked through the extension point "org.aspectj.org.eclipse.jdt.core.classpathVariableInitializer". After resolution, a classpath variable entry may either correspond to a project or a library entry.
- A named classpath container identified by its container path. A classpath container provides a way to indirectly reference a set of classpath entries through a classpath entry of kind CPE_CONTAINER. Typically, a classpath container can be used to describe a complex library composed of multiple JARs, projects or classpath variables, considering also that containers can be mapped differently on each project. Several projects can reference the same generic container path, but have each of them actually bound to a different container object. The container path is a formed by a first ID segment followed with extra segments, which can be used as additional hints for resolving this container reference. If no container was ever recorded for this container path onto this project (using JavaCore.setClasspathContainer(IPath, org.aspectj.org.eclipse.jdt.core.IJavaProject[], org.aspectj.org.eclipse.jdt.core.IClasspathContainer[], IProgressMonitor), then a ClasspathContainerInitializer will be activated if any was registered for this container ID onto the extension point "org.aspectj.org.eclipse.jdt.core.classpathContainerInitializer". A classpath container entry can be resolved explicitly using JavaCore.getClasspathContainer(IPath, org.aspectj.org.eclipse.jdt.core.IJavaProject) and the resulting container entries can contain any non-container entry. In particular, it may contain variable entries, which in turn needs to be resolved before being directly used.
  Also note that the container resolution APIs include an IJavaProject argument, so as to allow the same container path to be interpreted in different ways for different projects.
The result of IJavaProject.getResolvedClasspath(boolean) will have all entries of type CPE_VARIABLE and CPE_CONTAINER resolved to a set of CPE_SOURCE, CPE_LIBRARY or CPE_PROJECT classpath entries.
Any classpath entry other than a source folder (kind CPE_SOURCE) can be marked as being exported. Exported entries are automatically contributed to dependent projects, along with the project's default output folder, which is implicitly exported, and any auxiliary output folders specified on source classpath entries. The project's output folder(s) are always listed first, followed by the any exported entries.
Classpath entries can be created via methods on JavaCore.
See Also:

JavaCore#newLibraryEntry(org.eclipse.core.runtime.IPath, org.eclipse.core.runtime.IPath, org.eclipse.core.runtime.IPath), JavaCore#newProjectEntry(org.eclipse.core.runtime.IPath), JavaCore#newSourceEntry(org.eclipse.core.runtime.IPath), JavaCore#newVariableEntry(org.eclipse.core.runtime.IPath, org.eclipse.core.runtime.IPath, org.eclipse.core.runtime.IPath), JavaCore#newContainerEntry(org.eclipse.core.runtime.IPath), ClasspathVariableInitializer, ClasspathContainerInitializer

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`CPE_CONTAINER` Entry kind constant describing a classpath entry representing a name classpath container.
`static int`	`CPE_LIBRARY` Entry kind constant describing a classpath entry identifying a library.
`static int`	`CPE_PROJECT` Entry kind constant describing a classpath entry identifying a required project.
`static int`	`CPE_SOURCE` Entry kind constant describing a classpath entry identifying a folder containing package fragments with source code to be compiled.
`static int`	`CPE_VARIABLE` Entry kind constant describing a classpath entry defined using a path that begins with a classpath variable reference.

Method Summary

All Methods Instance Methods Abstract Methods Default Methods Deprecated Methods
Modifier and Type	Method and Description
`boolean`	`combineAccessRules()` Returns whether the access rules of the project's exported entries should be combined with this entry's access rules.
`IAccessRule[]`	`getAccessRules()` Returns the possibly empty list of access rules for this entry.
`int`	`getContentKind()` Returns the kind of files found in the package fragments identified by this classpath entry.
`int`	`getEntryKind()` Returns the kind of this classpath entry.
`IPath[]`	`getExclusionPatterns()` Returns the set of patterns used to exclude resources or classes associated with this classpath entry.
`IClasspathAttribute[]`	`getExtraAttributes()` Returns the extra classpath attributes for this classpath entry.
`IPath[]`	`getInclusionPatterns()` Returns the set of patterns used to explicitly define resources or classes to be included with this classpath entry.
`IPath`	`getOutputLocation()` Returns the full path to the specific location where the builder writes `.class` files generated for this source entry (entry kind `CPE_SOURCE`).
`IPath`	`getPath()` Returns the path of this classpath entry.
`IClasspathEntry`	`getReferencingEntry()` Returns the classpath entry that is making a reference to this classpath entry.
`IClasspathEntry`	`getResolvedEntry()` Deprecated. Use `JavaCore.getResolvedClasspathEntry(IClasspathEntry)` instead
`IPath`	`getSourceAttachmentPath()` Returns the path to the source archive or folder associated with this classpath entry, or `null` if this classpath entry has no source attachment.
`IPath`	`getSourceAttachmentRootPath()` Returns the path within the source archive or folder where package fragments are located.
`boolean`	`isExported()` Returns whether this entry is exported to dependent projects.
`default boolean`	`isTest()` This is a convience method, that returns `true` if the extra attributes contain an attribute whose name is `IClasspathAttribute.TEST` and whose value is 'true'.
`default boolean`	`isWithoutTestCode()` This is a convience method, that returns `true` if the extra attributes contain an attribute whose name is `IClasspathAttribute.WITHOUT_TEST_CODE` and whose value is 'true'.

- Field Detail
  - CPE_LIBRARY
```
static final int CPE_LIBRARY
```
    Entry kind constant describing a classpath entry identifying a library. A library is a folder or JAR containing package fragments consisting of pre-compiled binaries.
    
    See Also:
    
    Constant Field Values
  - CPE_PROJECT
```
static final int CPE_PROJECT
```
    Entry kind constant describing a classpath entry identifying a required project.
    
    See Also:
    
    Constant Field Values
  - CPE_SOURCE
```
static final int CPE_SOURCE
```
    Entry kind constant describing a classpath entry identifying a folder containing package fragments with source code to be compiled.
    
    See Also:
    
    Constant Field Values
  - CPE_VARIABLE
```
static final int CPE_VARIABLE
```
    Entry kind constant describing a classpath entry defined using a path that begins with a classpath variable reference.
    
    See Also:
    
    Constant Field Values
  - CPE_CONTAINER
```
static final int CPE_CONTAINER
```
    Entry kind constant describing a classpath entry representing a name classpath container.
    
    Since:
    
    2.0
    
    See Also:
    
    Constant Field Values
- Method Detail
  - combineAccessRules
```
boolean combineAccessRules()
```
    Returns whether the access rules of the project's exported entries should be combined with this entry's access rules. Returns true for container entries. Returns false otherwise.
    
    Returns:
    
    whether the access rules of the project's exported entries should be combined with this entry's access rules
    
    Since:
    
    3.1
  - getAccessRules
```
IAccessRule[] getAccessRules()
```
    Returns the possibly empty list of access rules for this entry.
    
    Returns:
    
    the possibly empty list of access rules for this entry
    
    Since:
    
    3.1
  - getContentKind
```
int getContentKind()
```
    Returns the kind of files found in the package fragments identified by this classpath entry.
    
    Returns:
    
    IPackageFragmentRoot.K_SOURCE for files containing source code, and IPackageFragmentRoot.K_BINARY for binary class files. There is no specified value for an entry denoting a variable (CPE_VARIABLE) or a classpath container (CPE_CONTAINER).
  - getEntryKind
```
int getEntryKind()
```
    Returns the kind of this classpath entry.
    Returns:
    one of:
    
    CPE_SOURCE - this entry describes a source root in its project
    CPE_LIBRARY - this entry describes a folder or JAR containing binaries
    CPE_PROJECT - this entry describes another project
    CPE_VARIABLE - this entry describes a project or library indirectly via a classpath variable in the first segment of the path *
    CPE_CONTAINER - this entry describes set of entries referenced indirectly via a classpath container
  - getExclusionPatterns
```
IPath[] getExclusionPatterns()
```
    Returns the set of patterns used to exclude resources or classes associated with this classpath entry.
    For source classpath entries, exclusion patterns allow specified portions of the resource tree rooted at this source entry's path to be filtered out. If no exclusion patterns are specified, this source entry includes all relevent files. Each path specified must be a relative path, and will be interpreted relative to this source entry's path. File patterns are case-sensitive. A file matched by one or more of these patterns is excluded from the corresponding package fragment root. Exclusion patterns have higher precedence than inclusion patterns; in other words, exclusion patterns can remove files for the ones that are to be included, not the other way around.
    
    Note that there is no need to supply a pattern to exclude ".class" files because a source entry filters these out automatically.
    
    The pattern mechanism is similar to Ant's. Each pattern is represented as a relative path. The path segments can be regular file or folder names or simple patterns involving standard wildcard characters.
    
    '*' matches 0 or more characters within a segment. So *.java matches .java, a.java and Foo.java, but not Foo.properties (does not end with .java).
    
    '?' matches 1 character within a segment. So ?.java matches a.java, A.java, but not .java or xyz.java (neither have just one character before .java).
    
    Combinations of *'s and ?'s are allowed.
    
    The special pattern '**' matches zero or more segments. In a source entry, a path like tests/ that ends in a trailing separator is interpreted as tests/**, and would match everything under the folder named tests.
    
    Example patterns in source entries (assuming that "java" is the only Java-like extension):
    - tests/** (or simply tests/) matches all files under a root folder named tests. This includes tests/Foo.java and tests/com/example/Foo.java, but not com/example/tests/Foo.java (not under a root folder named tests).
    - tests/* matches all files directly below a root folder named tests. This includes tests/Foo.java and tests/FooHelp.java but not tests/com/example/Foo.java (not directly under a folder named tests) or com/Foo.java (not under a folder named tests).
    - **/tests/** matches all files under any folder named tests. This includes tests/Foo.java, com/examples/tests/Foo.java, and com/examples/tests/unit/Foo.java, but not com/example/Foo.java (not under a folder named tests).
    Returns:
    
    the possibly empty list of resource exclusion patterns associated with this classpath entry, or null if this kind of classpath entry does not support exclusion patterns
    
    Since:
    
    2.1
  - getExtraAttributes
```
IClasspathAttribute[] getExtraAttributes()
```
    Returns the extra classpath attributes for this classpath entry. Returns an empty array if this entry has no extra attributes.
    
    Returns:
    
    the possibly empty list of extra classpath attributes for this classpath entry
    
    Since:
    
    3.1
  - getInclusionPatterns
```
IPath[] getInclusionPatterns()
```
    Returns the set of patterns used to explicitly define resources or classes to be included with this classpath entry.
    For source classpath entries, when no inclusion patterns are specified, the source entry includes all relevent files in the resource tree rooted at this source entry's path. Specifying one or more inclusion patterns means that only the specified portions of the resource tree are to be included. Each path specified must be a relative path, and will be interpreted relative to this source entry's path. File patterns are case-sensitive. A file matched by one or more of these patterns is included in the corresponding package fragment root unless it is excluded by one or more of this entrie's exclusion patterns. Exclusion patterns have higher precedence than inclusion patterns; in other words, exclusion patterns can remove files for the ones that are to be included, not the other way around.
    
    See getExclusionPatterns() for a discussion of the syntax and semantics of path patterns. The absence of any inclusion patterns is semantically equivalent to the explicit inclusion pattern **.
    
    Example patterns in source entries:
    - The inclusion pattern src/** by itself includes all files under a root folder named src.
    - The inclusion patterns src/** and tests/** includes all files under the root folders named src and tests.
    - The inclusion pattern src/** together with the exclusion pattern src/**/Foo.java includes all files under a root folder named src except for ones named Foo.java.
    Returns:
    
    the possibly empty list of resource inclusion patterns associated with this classpath entry, or null if this kind of classpath entry does not support inclusion patterns
    
    Since:
    
    3.0
  - getOutputLocation
```
IPath getOutputLocation()
```
    Returns the full path to the specific location where the builder writes .class files generated for this source entry (entry kind CPE_SOURCE).
    Source entries can optionally be associated with a specific output location. If none is provided, the source entry will be implicitly associated with its project default output location (see IJavaProject.getOutputLocation()).
    NOTE: A specific output location cannot coincidate with another source/library entry.
    
    Returns:
    
    the full path to the specific location where the builder writes .class files for this source entry, or null if using default output folder
    
    Since:
    
    2.1
  - getPath
```
IPath getPath()
```
    Returns the path of this classpath entry. The meaning of the path of a classpath entry depends on its entry kind:
    - Source code in the current project (CPE_SOURCE) - The path associated with this entry is the absolute path to the root folder.
    - A binary library in the current project (CPE_LIBRARY) - the path associated with this entry is the absolute path to the JAR (or root folder), and in case it refers to an external library, then there is no associated resource in the workbench.
    - A required project (CPE_PROJECT) - the path of the entry denotes the path to the corresponding project resource.
    - A variable entry (CPE_VARIABLE) - the first segment of the path is the name of a classpath variable. If this classpath variable is bound to the path P, the path of the corresponding classpath entry is computed by appending to P the segments of the returned path without the variable.
    - A container entry (CPE_CONTAINER) - the path of the entry is the name of the classpath container, which can be bound indirectly to a set of classpath entries after resolution. The containerPath is a formed by a first ID segment followed with extra segments that can be used as additional hints for resolving this container reference (also see IClasspathContainer).
    Returns:
    
    the path of this classpath entry
  - getSourceAttachmentPath
```
IPath getSourceAttachmentPath()
```
    Returns the path to the source archive or folder associated with this classpath entry, or null if this classpath entry has no source attachment.
    Only library and variable classpath entries may have source attachments. For library classpath entries, the result path (if present) locates a source archive or folder. This archive or folder can be located in a project of the workspace or outside the workspace. For variable classpath entries, the result path (if present) has an analogous form and meaning as the variable path, namely the first segment is the name of a classpath variable.
    
    Returns:
    
    the path to the source archive or folder, or null if none
  - getSourceAttachmentRootPath
```
IPath getSourceAttachmentRootPath()
```
    Returns the path within the source archive or folder where package fragments are located. An empty path indicates that packages are located at the root of the source archive or folder. Returns a non-null value if and only if getSourceAttachmentPath() returns a non-null value.
    
    Returns:
    
    the path within the source archive or folder, or null if not applicable
  - getReferencingEntry
```
IClasspathEntry getReferencingEntry()
```
    Returns the classpath entry that is making a reference to this classpath entry. For entry kinds CPE_LIBRARY, the return value is the entry that is representing the JAR that includes this in the MANIFEST.MF file's Class-Path section. For entry kinds other than CPE_LIBRARY, this returns null. For those entries that are on the raw classpath already, this returns null.
    It is possible that multiple library entries refer to the same entry via the MANIFEST.MF file. In those cases, this method returns the first classpath entry that appears in the raw classpath. However, this does not mean that the other referencing entries do not relate to their referenced entries. See JavaCore.getReferencedClasspathEntries(IClasspathEntry, IJavaProject) for more details.
    
    Returns:
    
    the classpath entry that is referencing this entry or null if not applicable.
    
    Since:
    
    3.6
  - isExported
```
boolean isExported()
```
    Returns whether this entry is exported to dependent projects. Always returns false for source entries (kind CPE_SOURCE), which cannot be exported.
    
    Returns:
    
    true if exported, and false otherwise
    
    Since:
    
    2.0
  - getResolvedEntry
```
IClasspathEntry getResolvedEntry()
```
    Deprecated. Use JavaCore.getResolvedClasspathEntry(IClasspathEntry) instead
    This is a helper method, which returns the resolved classpath entry denoted by an entry (if it is a variable entry). It is obtained by resolving the variable reference in the first segment. Returns null if unable to resolve using the following algorithm:
    - if variable segment cannot be resolved, returns null
    - finds a project, JAR or binary folder in the workspace at the resolved path location
    - if none finds an external JAR file or folder outside the workspace at the resolved path location
    - if none returns null
    Variable source attachment is also resolved and recorded in the resulting classpath entry.
    Returns:
    
    the resolved library or project classpath entry, or null if the given path could not be resolved to a classpath entry
    Note that this deprecated API doesn't handle CPE_CONTAINER entries.
  - isTest
```
default boolean isTest()
```
    This is a convience method, that returns true if the extra attributes contain an attribute whose name is IClasspathAttribute.TEST and whose value is 'true'.
    
    Returns:
    
    true, if if the extra attributes contain a attribute whose name is IClasspathAttribute.TEST and whose value is 'true'.
    
    Since:
    
    3.14
    
    See Also:
    
    getExtraAttributes(), IClasspathAttribute.TEST
  - isWithoutTestCode
```
default boolean isWithoutTestCode()
```
    This is a convience method, that returns true if the extra attributes contain an attribute whose name is IClasspathAttribute.WITHOUT_TEST_CODE and whose value is 'true'.
    
    Returns:
    
    true, if if the extra attributes contain a attribute whose name is IClasspathAttribute.WITHOUT_TEST_CODE and whose value is 'true'.
    
    Since:
    
    3.14
    
    See Also:
    
    getExtraAttributes(), IClasspathAttribute.WITHOUT_TEST_CODE

Interface IClasspathEntry

Field Summary

Method Summary

Field Detail

CPE_LIBRARY

CPE_PROJECT

CPE_SOURCE

CPE_VARIABLE

CPE_CONTAINER

Method Detail

combineAccessRules

getAccessRules

getContentKind

getEntryKind

getExclusionPatterns

getExtraAttributes

getInclusionPatterns

getOutputLocation

getPath

getSourceAttachmentPath

getSourceAttachmentRootPath

getReferencingEntry

isExported

getResolvedEntry

isTest

isWithoutTestCode